Details
Add this feature-laden, safety approved worklight to your toolbox of intrinsically safe equipment.
It provides a soft flood pattern to safely illuminate your work area.- Full 360 degree rotation head with 210 degrees of articulation
- Removable magnet with 135 lb pull strength
- Features a hang hook for hands-free use
- IPX4 water-resistant All openings o-ring sealed
- Serialized for positive identification
- 2 meter impact resistance tested
- CASE MATERIAL:
- Housing, base and battery housing made from high impact super tough nylon offering exceptional durability
- All openings are O-ring sealed for weather resistance
- Circular rare-earth magnet surrounded by durable nickel plated steel housing
- One way valve for case venting;
- DIMENSIONS:
- 9.2" H x 2.85" W | 23.4 cm x 7.2 cm
- Thickness (at magnet): 2.75" 7.0 cm
- WEIGHT:
- NiCd: 23.1 oz | 655 g
- Alkaline: 18.3 oz | 519 g
- LENS:
- Unbreakable polycarbonate with silicone anti-scratch coating assembled in a heavy duty bezel
- O-ring sealed
- LIGHT SOURCE:
- Two C4® LEDs within engineered reflector produce a smooth flood beam to illuminate your work area without tiring your eyes
- OUTPUT:
- High: 163 lumens; 730 candela
- Low: 50 lumens; 230 candela
- Moonlight for low-level lighting and extended run times
- Strobe
- RUN TIME:
- High:3.75 h
- Low: 12 h
- Moonlight: 20 days
- Strobe: 8 h
- All claims to 10% of initial lumen output.
- ON/OFF:
- Sonic welded push button switch designed for extremely long life
- Rubber dome push button actuator provides easy operation even when wearing heavy gloves.
- BATTERIES:
- Industrial rechargeable nickel-cadmium 4.8 volt, 1.8 amp hour, 4 cell sub-C can be recharged up to 1,000 times
- Optional four “AA” alkaline non-rechargeable battery pack provides fast replacement with readily available batteries
- APPROVALS:
- Class I & II Division 1, Groups C,D,F,G; Class III; T-Code: T4; Exia; NON-INCENDIVE: Class I Division 2; Groups A,B,C,D, T-CODE T4
- MSHA Permissible Flashlight; Approval. No. 20-4140001-0: Tested for Intrinsic Safety in Methane-Air mixtures only. Charge or replace batteries in fresh air only
- Charger meets requirements of NFPA 1901-14.1.11.2 (2003) mounted in any position
- Meets applicable European Community Directives.
THIS IS THE ONLY WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARE EXPRESSLY DISCLAIMED EXCEPT WHERE SUCH LIMITATION IS PROHIBITED BY LAW.
You may have other specific legal rights which vary by jurisdiction.