Jumbo ball intake valve, 6" Storz swivel x 4" Storz rigid

AX Series Jumbo Ball Intake Valve has a huge 5.25 inch diameter waterway giving low friction loss to maximize flow. Friction loss is 3psi at 2000gpm. Designed for use with 4 or 6 inch (100 or 150mm) hose. The 30° intake elbow swivels 360° and has multiple positive detents. Make hose connections in any direction with minimal kinks and coupling stress. Designed for pressure or vacuum service on a pumper. Maximum operating pressure is 250 psi (17bar). Meets 900 psi (62bar) hydrostatic strength test. The aluminum castings are hardcoat anodized with a powder coat finish inside and out for maximum corrosion protection. All of the components on the wet side of the valve are made of stainless steel for additional corrosion protection. The hand wheel needs 7.5 turns to close, meeting NFPA slow close requirements. There is a unique position indicator that shows the operator if the valve is open, closed or somewhere in between. The hand wheel is factory installed on the right side of valve, but can be switched to the left side if desired. Unit comes equipped with a rugged 0.75 inch (19mm) drain valve to quickly drain water from the valve housing. A port for an optional air bleed valve is in(more...)